Revel C208 Manual de usuario descargar pdf (Pagina 7)

Revel Performa3 C208/C205 Center Channel Loudspeaker

Owner’s Manual

ENGLISH

C208 Bi-Amped Connections

CAUTION: Remove the shorting straps before making

bi-amped connections. Failure to do so may cause damage

to some power ampliﬁers.

Bi-amped connections are made between both pairs of C208 input

terminals and two separate output channels of a single power ampliﬁer.

Each C208 input is connected to an individual power ampliﬁer channel,

which can sometimes increase sonic performance.

NOTE:

When making bi-amped connections, both power ampliﬁer

channels must receive identical input signals from the associated

preamp/processor. If the associated preamp/processor only has

one connector for the center channel, a “Y” adapter is required.

1. Remove the shorting straps.

2. Connect one loudspeaker cable to the high-frequency set of C208

input terminals. Then connect the other end of that loudspeaker

cable to the desired power ampliﬁer output channel.

3. Connect another loudspeaker cable to the low-frequency set

of C208 input terminals. Then connect the other end of that

loudspeaker cable to the other output channel of the same power

ampliﬁer you connected to the high-frequency input terminals.

4. Connect both ampliﬁer channel inputs to the center channel output

of the preamp/processor. If the preamp/processor only has one

connector for the center channel, use a “Y”-adaptor.

NOTE: Do not use an electronic crossover network when

bi-amping a Revel C208 loudspeaker. Doing so will cause a

considerable degradation of sound quality.

CENTER CHANNEL

PREOUT

OUTPUT A OUTPUT B

INPUT A

INPUT B

Preamp/Processor

Y-Adapter for

Single Connector

C208

Connector

Panel

Shorting

Straps

Removed

Two-Channel

Ampliﬁer

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Revel C208 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Acústica Revel C208